Digital Repeater
High Power Digital Repeater
Introduction
The Digital Band selective Repeater has multiple application possibilities. With its high output power, low interference, and fast implementation period. It can adapt to the complicated urban RF network, and efficiently provide signal coverage to the designated areas.
Product Features
| 1 | Frequency is adjustable and tuneable.0-25mhz for each suband. |
| 2 | Each bands support 4 maximum sub-bands. |
| 3 | Broad frequency range |
| 4 | Each subband be on and off for seperate gain control. |
| Accept to customize different Band | Uplink | Downlink |
| Frequency DCS/LTE1800 | 1710-1785 MHz | 1805-1880 MHz |
| WCDMA2100 | 1920-1980 MHz | 2110-2170 MHz |
| Subbands No. | 4 Subands For each System | 4 Subbands For Each System |
| Subbands Wideth | 0-25MHz (100Khz for each step) | 0-25MHz (100KHz for each step) |
| System Gain | 93±3dB | 95 ± 3 dB |
| Output Power | 40 ± 1 dBm (Total) | 43 ± 1 dBm (Total) |
| VSWR | ≤ 1.5:1 | ≤ 1.5:1 |
| Impedance | 50 W | 50 W |
| Max. non-destructive input power | 10dBm | 10dBm |
| Manual Gain Control | 31dB in step of 1dB | |
| Automatic Gain Control | ≧25dB | |
| Operating temperature range | -10 ºC to +40 ºC |
| Storage temperature range | -40°C to +85°C |
| Relative humidity | 5% - 85% |
| Ingress protection | Outdoor(IP65) |
| Monitoring and control | RJ45 (Local) |
| GSM/WCDMA modem(remote, optional) |
| Dimensions(L*W*H) | 500*440*187mm |
| Weight | <25Kg |
| Power supply | 110-260V 60Hz/50Hz |
| Power consumption rating | <300W |
| RF Connectors type | 2 x N-Female |
