Consummer Series
These Series include: Pico wideband analog repeater
J3F-TB,20~25dBm Output Power,75dB Gain
Introduction
The easy-to-install feature highlights it as a great solution for signal enhancement. In addition, the coverage area of the J3F-TB Is Three system Compact Repeater is up to 1000-1500M2.
Product Features
| 1 | Antenna isolation testing |
| 2 | Automatic gain control |
| 3 | Intelligent mode setting |
| 4 | Prevent the oscillation |
| 5 | Cost-effective for practical solutions |
| 6 | Low interference |
| Uplink | Downlink | |||
|---|---|---|---|---|
|
Frequency Range (Accept different frequency combinaiton) |
EGSM+DCS+WCDMA or the other tri-band combination | |||
|
Maximun Gain |
70dB±2dB |
75dB±2dB |
||
|
Output Power |
20dBm-25dBm |
20dBm-25dBm |
||
|
Digital attenuation(inside) |
25dB in step of 1dB |
|||
|
Maximun input power(non-destructive) |
10dbM(CW Signal) |
|||
| Spurious Emission | 9kHz～150KHz | ≤-36dBM/1 kHz | ||
| 150kHz～30MHz | ≤-36dBM/10 kHz | |||
| 30MHz～1GHz | ≤-36dBM/100 kHz | |||
| 1GHz～Flow-10MHz | ≤-30dBM/1 MHz | |||
| Flow-10MHz～Fhigh+10MHz | ≤-15dBM/1 MHz | |||
| Fhigh+10MHz～12.75GHz | ≤-30dBM/1 MHz | |||
| Frequency Stability | ≤±0.01ppm | |||
| Error Vector Magnitude | ≤10% | |||
| Auto Gain Control(AGC) | ≥25dB | |||
| Noise Figure | ≤6dB | |||
| Return loss | ≤-10dB | |||
| Group Delay | ≤1μs | |||
| Power Consumption | 8w | |||
| Power Supply | DC 6V/3A | |||
| 2、Mechanical specification | ||||
| Dimensions | 340*270*120 mm | |||
| Weight | ≤10kg | |||
| Impedance | (Nominal)50Ω | |||
| I/O Connector | N-female | |||
| 3、Environmental specification | ||||
| IP Rating | IP30 | |||
| Operating Temperature | -10℃～50℃ | |||
| 4、Monitoring specification | ||||
| Alarm | ||||
| LED indication | Power LED DC ON/OFF | |||
| AGC LED | ALC I～ 5dB,red | |||
| ISO LED | ISO red,Antenna isolation is lower than the isolation for equipment installation,repeater will adjust the gain automatically without neceassary of position adjusting for antennas. | |||
