J3F 23~27dBm Output Power, 75dB Gain

Consummer Series

These Series include: Pico wideband analog repeater

Introduction

Signalwing’s J3F series are designed for indoor application. It’s able to support any one of the popular mobile systems, and help consumers to improve the cellular coverage in houses, large building, pubs or underground parking lot with poor reception.

System status is clearly visible by LED indicators. The light weight and compact size make it easy installed. The coverage of J3F is ranging from 1000~3000 square meters due to different power level and input signal strength.

Product Features

1	Antenna isolation testing

2	Automatic gain control

3	Intelligent mode setting

4	Prevent the oscillation

5	Cost-effective for practical solutions

6	Low interference

Parameters		Uplink	Downlink
RF Band	CDMA800/ GSM850	824 ~ 849 MHz	869 ~ 894 MHz
	GSM & EGSM	880 ~ 915 MHz	925 ~ 960 MHz
	DCS	1710 ~ 1785 MHz	1805 ~ 1880 MHz
	PCS/ GSM1900	1850 ~ 1910 MHz	1930 ~ 1990 MHz
	WCDMA	1920 ~ 1980 MHz	2110 ~ 2170 MHz
	LTE2600	2500~2570 MHz	2620 ~ 2690 MHz
Max Gain	J3F-C-23	≥70dB	≥75dB
	J3F-C-25	≥70dB	≥75dB
	J3F-C-27	≥70dB	≥75dB
Max. Output Power	J3F-C-23	20dBm	23dBm
	J3F-C-25	20dBm	25dBm
	J3F-C-27	20dBm	27dBm
Band Width		Wide Band
Manual Gain Control		31dB in step of 1dB
Maximum Input Power(non-destructive)		0dBm(CW Signal)
AGC (Automatic Gain Control)		≧25dB
Gain Flatness		≦8dB(P-P)
Spurious Emission	9KHz~1GHz	≦ -36dBm
	1GHz~12.75GHz	≦ -30dBm
Error Vector Magnitude		≦ 10%
Noise Figure		≤ 6dB
VSWR		≦2.0
Group Delay		≤5μs
Frequency stability		≤ 0.01ppm
LED Alarm	Power LED	DC ON/OFF
	Alarm LED	Antenna isolation is lower than the isolation required for equipment installation; Or ALC1～5dB, Red
RF Connector		N-Female
Impedance		50Ω
Power Consumption		20W
Power Supply		AC:110~240V; DC: 9V/4A
Operating Temperature		-10℃~50℃
Environment Conditions		IP30
Dimensions (D x W x H )		19129676mm
Weight		≤4kg